Granite: From the Quarry to Your Countertop

0
15

Granite is one of the most popular choices for kitchen countertops. Because of its innate qualities such as heat resistance, water resistance, and durability, granite is great for kitchen and bathroom use. It is also considered one of the most beautiful options. If you’ve ever wondered how a slab of granite gets from the quarry to the kitchen, here is some information that might answer your questions.

Granite is a natural igneous rock that is formed from liquid rock, or hot magma, deep within the earth. This rock is eventually forced up from deep layers and then hardened and cooled. Granite is a durable rock that is stronger than many other rocks, including marble. The minerals that comprise granite include feldspar, quartz, and small amounts of amphiboles, mica, and other minerals. It is these various minerals just in different combinations that contribute to the various colors and grains visible in granite. The white in granite slabs is attributed to more mica in the stone, while darker slabs of granite are because of extra amounts of feldspar. The most common rock in the continental crust of the earth is granite. Usually rock or sediment has to be eroded or uncovered to expose the granite in the earth.

There are many different quarries and areas that have granite in the earth. A lot of granite is imported from other areas of the world, but there are some places in the United States where granite is found and quarried. These areas include Georgia, Massachusetts, Idaho, and a few other places. If you are looking for granite countertops and you do not live in one of these areas, don’t fret. Granite is commonly shipped and transported, so if you are looking for granite countertops in Ocala, FL, you can still get it easily.

For granite to get from the earth to a house or retailer, it takes a little over a month. Granite can be blasted, drilled, or cut from quarries in large blocks. It can then take up to 48 hours to cut individual slabs of granite from that one giant block. These slabs can be anywhere from 7 to 9 feet long. After cutting, the granite is covered with resin and cured in the oven. Then the granite is ready to be taken to a wholesaler for consumers. Custom countertops can be more expensive than pre-cut granite countertops because of the extra work that they require. Some kitchens may require some pre-cut and custom material because of the house’s design.

Installing granite countertops can be a lot of work. Some installers choose to cut holes for sinks or other fixtures at the site of installment, while others may do it beforehand. Diamond blades are used to cut these holes. Because granite can only be cut into slabs so long, most granite countertops will have a few seams. These seams are held in place by epoxy, and adjoined by silicone. Silicone is used between the two slabs of granite because it allows for contraction and expansion. The silicone and epoxy is often mixed with resin to minimize the color differences between the seams and the granite. Slight differences in granite thickness are to be expected when installing granite slabs, so shims are often used to guarantee the tops are even and flush on the countertop.

Granite is a beautiful rock that is cut from the earth. There are various colors and grains of granite, and granite can be cut to your kitchen’s specific dimensions. The large amount of granite retailers should make it easy to find somewhere near you to purchase granite, even if you are looking for granite countertops in Ocala, FL, an area without a quarry nearby. Despite the work it takes to get granite from the earth to your kitchen, it makes a beautiful countertop that is durable and timeless.

Source by McCullough Family Granite

Loading...